Panasonic TX-28PB50F Operating Instructions Manual Download

Page: 19 / 32

Press the

CH SEARCH

button to show

freeze---frames of the programmes being

broadcast on all of the stored channels. These

images are displayed in series clockwise around

the edge of the screen, starting from the top left.

The current programme is displayed in the centre

of the screen, still playing.

The feature cycles through the stored channels

until either the

STILL

key is pressed to pause the

search or the

CH SEARCH

button is pressed to exit

the feature.

Press the red button to select each channel’s

freeze---frame in turn.

Press the green button to watch the selected

channel, exiting the feature.

Press the blue button to watch the current

programme (displayed centre screen), exiting the

feature.

Press the

TELETEXT

button to move between

watching the current programme, viewing teletext

and the

picture and text

feature.

picture and text

lets you see the current programme and a page of

teletext side by side.

Whilst using this feature, the remote control affects

the teletext page; if you wish to make changes to

the programme viewed press the

TELETEXT

button to return to watching the programme on its

own then make the desired changes.

Press to freeze the picture, press again to return

to watching the current programme.

(Access

Strobe

via the

Setup

menu, see page 10).

Takes a series of freeze---frame images (one

second delay between each image being taken)

from the current programme watched, these are

displayed in series clockwise around the edge of

the screen, starting from the top left. The current

programme is displayed in the centre of the

screen, still playing.

To pause (freeze)

Strobe

, press the

STILL

button

on the remote control, press again to continue

taking the freeze---frames. To exit the

Strobe

feature and return to watching the current

programme, press any button on the remote

control other than

STILL

INDEX

CH SEARCH

Strobe

mode

HOLD

STILL

TELETEXT

mode

Picture and text

mode

TV/TEXT

Channel search

HOLD

STILL

INDEX

CH SEARCH

HOLD

STILL

Channel search

INDEX

CH SEARCH

Picture and text

TV/TEXT

Still

HOLD

STILL

Strobe

Summary of Contents for TX-28PB50F

































Search results

Summary of Contents for TX-28PB50F

Reviews:

Related manuals for TX-28PB50F

Brands by name

Popular brands

Panasonic TX-28PB50F, Operating Instructions Manual

Search results

Summary of Contents for TX-28PB50F

Reviews:

Related manuals for TX-28PB50F

Brands by name

Popular brands