Panasonic TX-28PB50F Operating Instructions Manual Download

Page: 5 / 32

Adjust Volume

Change Programme

You are now ready to begin viewing programmes

The cursor controls provide the two basic functions:

Slight tilting of the picture may be noticeable, the Geomagnetic Correction feature

can be used to eliminate this, if necessary:

First, ensure the

Auto setup

and

Q---Link

download procedures are complete. The

screen should not be showing any On Screen Display menus.

Using the remote control keys indicated, access the

Geomagnetic Correction

menu option and follow the procedure below (for a full explanation of the On

Screen Display menu system see page 7) :

Press the

SETUP

menu button

Move to the

Geomagnetic

menu option

Access the

Geomagnetic

Adjust the picture tilt as necessary

Press the TV/AV button to exit the

SETUP

TV/AV

SET UP

We recommend that as soon as the

Auto setup

feature is completed, the

picture controls are reset to normal viewing levels. To do this, press the ”

”

button, found under the remote control’s pull down flap.

If you wish to connect external amplifiers and speakers, see pages 29 and 30.

Once

Auto setup

is complete, if you are installing a new Q---Link compatible VCR, you can now switch it

Downloaded tuning data will match the television’s. Not all VCRs suport this download of programme information,

some may require to be started manually. See the VCR instruction book for details.

If the VCR has not accepted download data from the TV, you may need to select the download option from the

VCR’s menu.

Q---Link

is not operating correctly, check it is connected to the television’s AV2 socket, the SCART

lead is a “full function” type, and the VCR is compatible with Q---Link,

NEXTVIEWLINK

or similar technologies.

Ask your dealer for further details.

For further information on

Q---Link

and connecting equipment, see pages 20, 27 and 28.

If you do not wish to connect any external amplifiers and speakers at all, we

recommend that you switch

Surround

sound

Off.

The sound output will then be two

channel (ie: left and right) stereo or mono.

With the

Surround

feature switched off some additional features become available in

the

SOUND

menu, see page 9.

Press the

Surround

button to switch between

and

Off

Note:

Accessing the

Surround

menu (via the

SOUND

menu) automatically switches the

Surround

feature

On.

Quick Start Guide

Summary of Contents for TX-28PB50F

































Search results

Summary of Contents for TX-28PB50F

Reviews:

Related manuals for TX-28PB50F

Brands by name

Popular brands

Panasonic TX-28PB50F, Operating Instructions Manual

Search results

Summary of Contents for TX-28PB50F

Reviews:

Related manuals for TX-28PB50F

Brands by name

Popular brands