Panasonic TX-32ES600E Ehelp Download

Page: 222 / 290

Common Interface

Caution

If the encrypted message is displayed on the screen, the correct Common

Interface (CI) Module and smart card that are required for this service are not

inserted.

■

How to insert CI module and smart card

●

Turn the TV off with Mains Power On / Off switch whenever inserting or

removing the CI module.

●

If a smart card and a CI module come as a set, first insert the CI module,

then insert the smart card into the CI module.

●

Insert or remove the CI module completely in the correct direction as

shown.

●

Remove the CI module from the TV when placing the TV facing upward.

This may cause damages to the CI module and CI slot.

= Note =

●

There might be some CI modules in the market with older firmware

versions that do not work fully interoperable with this new CI+ v1.3 TV. In

this case, please contact your content provider.

- 222 -

Summary of Contents for TX-32ES600E



































































































































































































































































































Search results

Summary of Contents for TX-32ES600E

Reviews:

Related manuals for TX-32ES600E

Brands by name

Popular brands

Panasonic TX-32ES600E, Ehelp

Search results

Summary of Contents for TX-32ES600E

Reviews:

Related manuals for TX-32ES600E

Brands by name

Popular brands