Panasonic TX-32F500A, Operating Instructions Manual

29

Surround Sound

Advanced Remote Control Operation

■

Manufacturer’s Code Settings

This Remote Control has been designed to work with a variety of VCRs and DVD players. In order for this to occur, 
the setting for the VCR or DVD must be programmed into the Remote Control.

1. To set a VCR, slide the Remote Control VCR-DVD switch 

 to VCR.

To set a DVD, slide the Remote Control VCR-DVD switch 

 to DVD. 

2. Press the Remote Control VCR-DVD Power button 

 and keep it pressed.

3. Enter the Manufacturer’s two-digit code number using the Remote Control Number buttons 

 ~ 

. (The 

codes are shown below.)

4. Press the Stop button 

.

5. Release the Remote Control VCR or DVD Power button 

.

6. Check the operation of the VCR or DVD. If it does not operate correctly, repeat steps 1 to 5 and use an alternate 

code (if there is one).

VCR Codes

DVD Codes

Notes:

1. If the batteries are removed from the Remote Control, the Manufacturer’s codes are lost and must be 

reprogrammed.

2. The list of Manufacturer’s codes is given as a guideline only. Panasonic cannot guarantee that any other 

manufacturer’s product will work with this Remote Control.

Surround 

This button switches the Dolby Virtual surround on and off. 
Please refer to page 20.

Stereo / Mono

Pressing the button changes the mode from Stereo (

) to 

Mono ( ) and back again. Normally the television will detect 
whether the broadcast signal is Mono or Stereo and will set 
the mode accordingly. If the Stereo signal is weak or if the 
receiving conditions are not the best, it is recommended that 
the Mono mode be manually selected.

Bilingual *

This system allows two languages to be transmitted for one 
broadcast. Switching between the Main (

I

) and Sub (

II

) 

positions selects the desired languages.

* 

Note:

• Bilingual sound is currently not available in Australia or 

New Zealand.

Manufacturer Code

Manufacturer Code

Panasonic/National

10, 11, 12, 13

AIWA

15, 16

FUJITSU

20

HITACHI

25, 26, 27

JVC

30, 31, 32

MITSUBISHI

35, 36

NEC

40, 41, 42, 43

ORION

45, 46

Philips

50

SANYO

55, 56, 57, 58

SHARP

60, 61

SONY

65, 66, 67

TOSHIBA

70, 71

Manufacturer Code

Panasonic

70

PICTURE

SOUND

SET UP

TV/TEXT

100Hz/

PROGRE

SURROUND

ASPECT

TV/AV

F.P.

HOLD

INDEX

STILL

CH SEARCH

i

1

2

3

4

5

6

7

8

9

SURROUND

VCR

DVD

0

9

VCR

DVD

TX32F500A-2912_E  Page 29  Monday, July 18, 2005  5:59 PM