- 90 -
2) Set
Satellite
for the selected LNB.
– Select
No Satellite
if you do not know the connected satellite.
(Available satellite will be searched in
Auto Setup
.)
– Select
User defined
to set
Test Transponder Frequency
manually.
– If you set to
Single Cable
, additional settings are required. Set
User
Band
,
User Band Frequency
and
PIN
(depending on the Single
Cable router you use). For details, read the manual of the Single
Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press
BACK/RETURN
to store.
6. Select
Auto Setup
with / and press
OK
to access.
7. Select
Search Mode
/
Scan Mode
with / and press
OK
to access.
8. Set with / and press
OK
to store.
●
Scan Mode
Full
:
Scans the whole frequency range.
Quick
:
Scans the suitable frequency for the selected satellite.
●
After settings, select
Start scan
with / and press
OK
to search.
9. The confirmation screen is displayed and press
OK
to start
Auto Setup
.
(Settings are made automatically.)
●
When the operation is completed, the channel at the lowest position will
be displayed.
Summary of Contents for TX-39ASW654
Page 260: ...Ver 2 02 ...
