Panasonic TX-39ASW654 Ehelp Download

Page: 23 / 260

- 23 -

Selecting channel

1. Display

TV Selection

with

2. Select the mode with / and press

to set.

DVB-S

DVB-C

DVB-T

DVB-via-IP

Analogue

●

The selectable modes vary depending on the channels stored.

●

You can also select the mode pressing

repeatedly.

●

TV Selection

is not displayed, press

to switch the mode.

3. Select a channel with

Channel Up / Down

Numeric buttons

●

Press

Numeric buttons

to select a channel position with 2 or more-digit

(e.g. 399, press

■

To select a channel from the channel list

1. Display the channel list with

2. Select a channel from the list with / and press

to watch.

●

To sort channel names in alphabetical order

(red)

●

To change the category

(blue)

■

To select a channel using information banner

1. Display information banner with if it is not displayed.
2. Select a channel with / and press

to watch while the banner is

displayed.

Watching > Basic > Information banner

Summary of Contents for TX-39ASW654





































































































































































































































































Search results

Summary of Contents for TX-39ASW654

Reviews:

Related manuals for TX-39ASW654

Brands by name

Popular brands

Panasonic TX-39ASW654, Ehelp

Search results

Summary of Contents for TX-39ASW654

Reviews:

Related manuals for TX-39ASW654

Brands by name

Popular brands