- 38 -
Watching external input
Connect the external equipment (VCR, DVD, etc.) and you can watch through
the input.
1. Display the input selection menu with
AV
.
2. Select the input mode connected to the equipment with / and press
OK
to watch. (The selected mode is displayed on the top left of the
screen.)
●
TV receives input signals automatically connecting with SCART when
playback starts.
– Input signals are automatically identified by the SCART (pin 8) terminal.
– This function is also available for HDMI connections when
VIERA Link
is set to
On
.
Functions > VIERA Link “HDAVI Control™” > Easy playback
– When input mode is not switched automatically, perform as above or
check the setup of the equipment.
●
You can also select the input pressing
AV
. Press repeatedly until the
desired input is selected.
●
To switch between
COMPONENT
and
VIDEO
in
AV2
, select with / .
●
You can label or skip each input mode. Skipped inputs will not be
displayed when
AV
is pressed. (
Input Labels
)
●
The remote control is capable of operating the contents or external
equipment.
Watching > External equipment > Operating with TV’s remote control
●
To return to TV mode
TV
= Note =
●
If the external equipment has an aspect adjustment function, set it to
16:9
.
●
For details, read the manual of the equipment or ask your local dealer.
Summary of Contents for TX-39ASW654
Page 260: ...Ver 2 02 ...
