- 73 -
Timer Programming
This function allows you to select programmes that you want to be reminded
to watch or record to the USB HDD.
1. Select the forthcoming programme with / / / and press
OK
to
access.
2. Select
USB HDD Rec.
/
Reminder
with / and press
OK
to set.
●
To check / change / cancel a timer event
Recording > Timer Programming > Editing Timer Programming
●
LED will turn to orange in Standby mode if
Timer Programming
is set.
●
To return to
TV Guide
BACK/RETURN
●
If you select the current programme, a confirmation screen asking
whether you want to watch or record the programme appears. Select
Timer Programming
with / and press
OK
to set
USB HDD Rec.
to
record from the time you finish the timer event setting.
●
Depending on the country you select, you can set
Signal Supported
Recording
(see below).
= Note =
●
Not valid in Analogue
●
Timer Programming
only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
No other channels can be selected while the recording of
Timer
Programming
is in progress.
●
When recording programmes to the USB HDD, be sure to format the USB
HDD and enable it to record in
USB Device Setup
.
●
To set timer programming events of this TV on the network equipment
(smartphone, etc.) from outside the home network
Summary of Contents for TX-39ASW654
Page 260: ...Ver 2 02 ...
