background image

English

   - 31 -

Important Instruction

For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.

MAINS (AC) OPERATION

The wires in the mains lead are coloured in accordance with the following code :

1

2

3

4

1. 

Green&Yellow (Earth) (if there is earth cable)

2. 

Blue (Neutral)

3. 

Brown (Live)

4. 

Fuse

IMPORTANT

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured 

markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal which is marked 

with the letter E, or by the earth symbol, or coloured green or green and yellow.
The wire which is coloured blue or black must be connected to the terminal which is marked with 

the letter N or coloured Black.
The wire which is coloured brown or red must be connected to the terminal which is marked with 

the letter L or coloured Red.
For continued protection against risk of fire, replace only with same type and rating of fuse (ASTA 

approved 5A 250VAC fuse).

CAUTION

TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING 

COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

SAFETY PRECAUTION

THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO 

NOT ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.

Summary of Contents for TX-39GS352B

































Reviews: