Panasonic TX-40CS610EW Manual Download

Page: 184 / 277

DVB-via-IP Server Selection

■

Preparations

●

Ensure the network connections and network settings are completed.

Functions > DVB-via-IP > DVB-via-IP client connection

Network > Network settings

●

Ensure the server settings are completed. For details, read the manual of

DVB-via-IP server.

■

DVB-via-IP Server Selection

1. Display the menu with

2. Select

Setup

Tuning Menu

Add TV Signal

and press

to access.

3. Select

DVB-via-IP

and press

to access.

4. Select

Start Auto Setup

and press

to access.

5. Select a server from

Server List

and press

to set.

6. Select

Client Settings

and press

to access.

1) Select

Unicast Environment

Multicast Environment

and press

set.

●

Select

Unicast Environment

to use in a home network.

●

Select

Multicast Environment

to use in multi family housing units,

hotel, hospital, etc. (All servers are selected automatically.)

2) Select

Server List

and press

to access.

7. Select

Search Channels

and press

to access.

8. Select a search mode and press

to access.

9. Set

DVB-via-IP Search Mode

and press

to start

Auto Setup

. (Settings

are made automatically.)

●

Set

DVB-via-IP Satellite Configuration

to tune DVB-S channels.

●

Set

DVB-via-IP Cable Configuration

to tune DVB-C channels.

●

When the operation is completed, the channel at the lowest position will

be displayed.

= Note =

●

If tuning has not been done completely, set

Manual Tuning

Watching > Tuning and editing channels > Manual Tuning

●

Depending on the network condition and broadcast, this function may not

be available.

- 184 -

Summary of Contents for TX-40CS610EW






















































































































































































































































































Search results

Summary of Contents for TX-40CS610EW

Reviews:

Related manuals for TX-40CS610EW

Brands by name

Popular brands

Panasonic TX-40CS610EW, Manual

Search results

Summary of Contents for TX-40CS610EW

Reviews:

Related manuals for TX-40CS610EW

Brands by name

Popular brands