Panasonic TX-40CS610EW Manual Download

Page: 208 / 277

Using Common Interface

The Common Interface Module menu provides access to software contained

in Common Interface (CI) Modules.

●

This function may not be available in some countries or regions.

●

Video and audio signals may not be output depending on the broadcast or

service.

Although CI module may enable you to view some services, this TV does not

guarantee all services (e.g. encrypted pay-TV channels). Please use only the

broadcaster-approved CI module. Consult the operator / broadcaster or CI

module manufacturer for more information and conditions of the services.

■

Insert the CI module (optional)

●

Normally encrypted channels will appear. (Viewable channels and their

features depend on the CI module.) If encrypted channels do not appear,

take the following steps.

●

For details, read the manual of the CI module, or check with the content

provider.

1. Select the mode with

DVB-C

DVB-T

2. Display the menu with

3. Select

Setup

Common Interface

and press

to access.

4. Select

Slot 1:

, press

and follow the on-screen instructions.

●

On-screen instructions may not correspond to the remote control buttons.

- 208 -

Summary of Contents for TX-40CS610EW






















































































































































































































































































Search results

Summary of Contents for TX-40CS610EW

Reviews:

Related manuals for TX-40CS610EW

Brands by name

Popular brands

Panasonic TX-40CS610EW, Manual

Search results

Summary of Contents for TX-40CS610EW

Reviews:

Related manuals for TX-40CS610EW

Brands by name

Popular brands