Panasonic TX-40CS610EW Manual Download

Page: 89 / 277

Auto Setup

Automatically retunes the channels received in the area.

●

This function is available if channel tuning is already performed.

●

Only the selected mode is retuned. All the previous tuning settings are

erased.

●

Child Lock PIN number is required to retune locked channels.

Functions > Child Lock > PIN number

●

If tuning has not been done completely, set

Manual Tuning

Watching > Tuning and editing channels > Manual Tuning

■

DVB-C, DVB-T, Analogue

1. Select

Auto Setup

and press

to access.

2. Set

DVB-C Auto Setup Settings

and press

to store. (DVB-C)

●

Scan Mode
Full

Scans the whole frequency range.

Quick

Scans the suitable frequency in your country.

●

Normally set

Frequency

Symbol Rate

and

Network ID

Auto

. If

Auto

is not displayed or if necessary, enter each value specified by your

cable provider with

Numeric buttons

●

After settings, select

Start scan

and press

to search.

3. A confirmation screen is displayed and press

to start

Auto Setup

(Settings are made automatically.)

●

When the operation is completed, the channel at the lowest position will

be displayed.

- 89 -

Summary of Contents for TX-40CS610EW






















































































































































































































































































Search results

Summary of Contents for TX-40CS610EW

Reviews:

Related manuals for TX-40CS610EW

Brands by name

Popular brands

Panasonic TX-40CS610EW, Manual

Search results

Summary of Contents for TX-40CS610EW

Reviews:

Related manuals for TX-40CS610EW

Brands by name

Popular brands