Panasonic TX-40CXW704 Ehelp Download

Page: 109 / 339

Channel List

■

Skip unwanted channels

You can hide (skip) unwanted channels. The hidden channels cannot be

displayed except in this function.
1. Select

Channel List

and press

to access.

2. Select a channel.
3. Press

to set

Reveal

Hide

(skip).

Reveal

Hide

(skip)

●

To reveal all channels (if available)

(yellow)

●

To sort channel names in alphabetical order (DVB)

(red)

●

To change the category (DVB)

(blue)

■

Edit DVB / Analogue Channels

●

To swap / move the channel position (if available)
1) Press

(green) to edit.

2) Set the new position with

Cursor buttons

Numeric buttons

, and press

(green) to store.

●

To retune each channel (

Manual Tuning

)

(red)

– For Analogue

Watching > Tuning and editing channels > Manual Tuning

– Only for the revealed channels

- 109 -

Summary of Contents for TX-40CXW704




















































































































































































































































































































































Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands

Panasonic TX-40CXW704, Ehelp

Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands