Panasonic TX-40CXW704 Ehelp Download

Page: 140 / 339

Sharing file

You can share the files between PC and devices connected to this TV.

●

To enable this function, connect this TV to your home network.

Network > Network connections

Network > Network settings

1. Display the menu with

2. Select

Network

File Sharing Settings

File Sharing Server

and press

to access.

3. Select

and press

to set.

4. Operate your PC to share the files.

●

For operations, refer to the support information on the following website.
http://panasonic.net/viera/support (English only)

●

This function is not available when the TV is turned off with Mains Power

On / Off switch. You can share the files in Standby mode when

DLNA

Server

is set to

= Note =

●

Regarding performance, not all PCs are guaranteed. PCs with Windows 7

/ Windows 8 / Windows 8.1 have been tested for compatibility with this TV

(as of January, 2015). Additional information about the PCs may be found

on the following website.
http://panasonic.net/viera/support (English only)

●

Do not turn the TV off, pull out the mains plug or remove the device during

operation (reading, copying, etc.). Doing so may cause malfunction of the

device or damage the recorded data.

●

All data in the USB HDD will be erased when you format the USB HDD

with this TV for recording.

●

To connect the USB HDD

Recording > USB HDD setup

●

Picture noise may occur on the screen when playback starts during

operation (reading, copying, etc.).

●

For details of the devices

Media Player > Technical information

- 140 -

Summary of Contents for TX-40CXW704




















































































































































































































































































































































Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands

Panasonic TX-40CXW704, Ehelp

Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands