Panasonic TX-40CXW704 Ehelp Download

Page: 243 / 339

Standby Power Save

Set

Standby Power Save

VIERA Link Settings

to use this function.

The power consumption of the connected equipment in Standby mode is

controlled higher or lower in synchronisation with the TV on / off state to

reduce the consumption.
When the TV is set to Standby mode, the connected equipment is

automatically set to Standby and the power consumption of the connected

equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode,

but the power consumption is increased to start the connected equipment

fast.

●

This function is effective if the connected equipment can change the power

consumption in Standby mode and is set to higher consumption.

●

This function works when

Power off Link

is set to

- 243 -

Summary of Contents for TX-40CXW704




















































































































































































































































































































































Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands

Panasonic TX-40CXW704, Ehelp

Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands