Panasonic TX-40CXW704 Ehelp Download

Page: 94 / 339

■

Signal Supported Recording

Timer Programming

which is controlled by

information from the TV Guide; if programme start and end times are changed

by the broadcaster, the timer event will follow the change. Note that

Signal

Supported Recording

only works reliably if correct information is received

from broadcasters.

●

The availability of this function depends on the country and TV mode you

select.

●

is displayed on the timer event if

Signal Supported Recording

is set.

= Note =

●

If you edit the start time or end time of a signal supported recording event

by more than 10 minutes, it will no longer follow the broadcaster’s changes

to the start or end time. The start and end times will become fixed.

- 94 -

Summary of Contents for TX-40CXW704




















































































































































































































































































































































Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands

Panasonic TX-40CXW704, Ehelp

Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands