Panasonic TX-40CXW704 Ehelp Download

Page: 99 / 339

Note

●

Display the image (TV, external input, etc.) full-screen for viewing 3D.

●

If the room is lit by fluorescent lights (50 Hz) and light appears to flicker

when using the 3D Eyewear, switch off the fluorescent light.

●

Do not apply pressure on or scratch the lens of the 3D Eyewear.

●

3D content will not be correctly visible if the 3D Eyewear is worn upside

down or back-to-front.

●

When viewing 3D images, make sure your eyes are in a horizontal position

where double vision does not occur.

●

Do not wear the 3D Eyewear for purposes other than viewing 3D images.

Liquid crystal displays (such as computer screen, digital clock, calculator,

etc.) may be difficult to see while wearing the 3D Eyewear.

●

Do not use the 3D Eyewear as a substitute for sunglasses.

●

3D effects may be perceived differently depending on the person.

- 99 -

Summary of Contents for TX-40CXW704




















































































































































































































































































































































Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands

Panasonic TX-40CXW704, Ehelp

Search results

Summary of Contents for TX-40CXW704

Reviews:

Related manuals for TX-40CXW704

Brands by name

Popular brands