English
18
Installing / Removing batteries
Pull open
Hook
Note the correct
polarity (+ or -)
Close
Indicator / Control panel
When pressing 3, 4, 5 buttons, the control panel
guide appears on the right side of the screen for
3 seconds to highlight which button has been
pressed.
4
5
6
3
1
2
Rear side of the TV
Note
Location of indicators may vary depending on the
models.
1 Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
Ambient
sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On].
2 Power LED
Red:
Standby
Green:
On
•
Depending on the ambient brightness,
adjusts the brightness of LED to easy-to-view
levels automatically.
Orange:
Standby with some functions (recording, etc.)
active
The LED blinks when the TV receives a command
from the remote control.
3 Input mode selection
Press repeatedly until you reach the desired mode.
[Main Menu]
Press and hold for about 3 seconds to display main
menu.
OK
(when in the menu system)
4 Channel Up / Down
Cursor Up / Down (when in the menu system)
5 Volume Up / Down
Cursor Left / Right (when in the menu system)
6
Mains power On / Off switch
Use to switch the mains power.
To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
[
]: Standby / On
TQB0E2929U.indd 18
03/02/2020 3:26:46 PM
