English
- 17 -
Channel Scan:
Start a scan for digital cable channels.
If available, operator options will be listed. Select the
desired one and press
OK
.
Scan Mode
,
Frequency
and
Network ID
options may be available. The options
may vary depending on the operator and the
Scan
Mode
selections. Set the
Scan Mode
as
Full
if you
don’t know how to set up other options. Highlight
Scan
and press
OK
or the
Right
directional button to start
the scan. You can press the
Back
/Return
button to
cancel the scan. The channels that have already been
found will be stored in the channel list.
Single RF Scan:
Enter the
Frequency
value.
Signal
Level
and
Signal Quality
of the selected
Frequency
will be shown. Highlight
the
Scan
option and press
OK
or the
Right
directional button to start scan. The found
channels will be stored in the channel list.
LCN:
Set your preference for LCN. LCN is the Logical
Channel Number system that organises available
broadcasts in accordance with a recognisable channel
number sequence (if available).
Channel Scan Type:
Set your scan type preference.
Channel Store Type:
Set your store type preference.
Favourite Network Select:
Select your favourite ne-
twork. This menu option will be active, if more than one
network is available. This option may not be available
depending on the selected country during the initial
setup process.
Channel Skip:
Set channels to be skipped when
switching the channels via
Pro/-
buttons
on the remote. Highlight the desired channel/s on the
list and press
OK
to select/unselect.
Channel Swap:
Replace the positions of the two
selected channels in the channel list. Highlight the
desired channels on the list and press
OK
to select.
When the second channel is selected, the position of
this channel will be replaced with the position of the
first selected channel. You can press the
Yellow
button
and enter the number of the channel you want to select.
Then highlight
OK
and press
OK
to go to that channel.
You may need to set the
LCN
option to
Off
in order to
enable this feature.
Channel Move:
Move a channel to the position of
another channel. Highlight the channel you want to
move and press
OK
to select. Then do the same for a
second channel. When the second channel is selected,
you can press the
Blue
button and the first selected
channel will be moved to the position of that channel.
When the confirmation dialogue appears, highlight
YES
and press
OK
to proceed. You can press the
Yellow
button and enter the number of the channel
you want to select. Then highlight
OK
and press
OK
to go to that channel. You may need to set the
LCN
option to
Off
in order to enable this feature.
Channel Edit:
Edit channels in the channel list. Edit
the name and channel number
(*)
of the selected
channel and display
Network Name
,
Channel Type
,
Frequency
,
Modulation
and
Symbol Rate
informati-
on related to that channel. Depending on the channel
other options may also be editable. Press
OK
or the
Yellow
button to edit the highlighted channel. You can
press the
Blue
button to delete the highlighted channel.
(*)
The selected channel number should not be used for
another channel in the channel list. You may need to set the
LCN
option to
Off
in order to change the channel number.
Channel Delete:
Highlight the desired channel/s on
the list and press
OK
or the
Yellow
button to select/
unselect. Then press the
Blue
button to delete the
selected channel/s. When the confirmation dialogue
appears, highlight
YES
and press
OK
to proceed.
Clear Channel List:
Delete all channels stored in the
channel list. A dialogue will be displayed for confirma-
tion. Highlight
OK
and press
OK
to proceed. Highlight
Cancel
and press
OK
to cancel.
Input Source - Satellite
Satellite Re-scan:
Start a satellite scan beginning
with the antenna selection screen. When this scanning
option is preferred, some scanning configurations will
not be available and thus the preferences you made
during the initial setup process may not be changed.
For the
General Satellite
channel installation mode
the
SatcoDX Scan
option may also be available here.
For standard installation select
Normal scan
. For
SatcoDX installation select
SatcoDX Scan
and copy
the relevant sdx file into the root directory of an USB
storage device and connect it to your TV. Highlight this
option and press
OK
.
Download SatcoDX
option will
be highlighted, press
OK
to continue. Select the sdx
file from the connected USB storage device on the next
screen and press
OK
. Satellite selection screen will
be displayed. The status of the first satellite option will
appear as
On
. Highlight that satellite option and press
OK
. Set the parameters corresponding to your system
and correct satellite and press
the
Back/Return
button
to return to the satellite selection screen.
Highlight
Next
and press
OK
to proceed with the SatcoDX channel
list installation. If the selected satellite is not correct
for SatcoDX installation, a warning dialogue will be
displayed on the screen. The satellite/s that can be
selected will be listed. Press
OK
to close the dialogue
and press
Back/Return
to return to satellite selection
screen. Then set the satellite accordingly.
Satellite Add:
Add satellite and perform a satellite
scan. This menu option will be active, if
Channel
Installation Mode
is set to
General Satellite
.
Satellite Update:
Search for any updates by repeating
the previous scan with the same settings. You will also
be able to configure these settings before the scan. If
Channel Installation
Mode
is set to
Preferred Sat-
ellite
this option may be named differently depending
on the available services. Highlight the satellite and
press
OK
to configure detailed satellite parameters.
