Panasonic TX-42ASE650 Ehelp Download

Page: 224 / 238

- 224 -

Analogue TV

Before requesting service or assistance, please follow these simple guides to

solve the problem.
If the problem still persists, please contact your local Panasonic dealer for

assistance.

White spots or shadow image (ghosting) occurs / Some channels cannot be

tuned

●

Check the position, direction and connection of the aerial.

●

Weather conditions will affect signal reception (heavy rain, snow, etc.),

in particular in poor reception areas. Even during good weather, the high

pressure can cause poor reception of some channels.

●

Turn the TV off with Mains Power On / Off switch, and then on again.

●

If the problem persists, consult your local dealer or service provider for the

availability of services.

No programmes shown on

TV Guide

●

Adjust the direction of the aerial to another transmitter installed nearby.

●

Check the analogue broadcast. If the image quality is poor, check the

aerial and consult your local dealer.

Summary of Contents for TX-42ASE650















































































































































































































































Search results

Summary of Contents for TX-42ASE650

Reviews:

Related manuals for TX-42ASE650

Brands by name

Popular brands

Panasonic TX-42ASE650, Ehelp

Search results

Summary of Contents for TX-42ASE650

Reviews:

Related manuals for TX-42ASE650

Brands by name

Popular brands