Panasonic TX-43HX600B, Operating Instructions Manual

English

   - 15 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a 

wall socket (220-240V AC, 50 Hz). 

To switch on the TV from standby

•  Press the 

Standby

 button, 

Pro/-

 or a 

numeric button on the remote control.

•  Press the centre of the joystick on the TV in or push 

it up/down.

To switch on the TV from hard standby

•  Press the centre of the joystick on the TV in.

To switch the TV into standby

Press the 

Standby 

button on the remote control, the 

TV will switch into standby mode.

To switch the TV into hard standby

Press the centre of the joystick on the TV in and hold it 

down for more than 3 seconds, the TV will switch into 

hard standby mode.

To switch off the TV

To power down the TV completely, unplug the power 

cord from the mains socket.

Note:

 When the TV is switched into standby mode, the standby 

LED can blink to indicate that features such as Standby 

Search, Over Air Download or Timer is active. The LED can 

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language 

selection screen is displayed. Select the desired 

language and press 

OK

. In the following steps of 

the installation guide, set your preferences using the 

directional buttons and 

OK

 button.

On the second screen set your country preference.

Depending on the 

Country

 selection you may be asked 

to set and confirm a PIN at this point. The selected PIN 

cannot be 0000. You have to enter it if you are asked 

to enter a PIN for any menu operation later.
You can activate 

Store Mode

 option in the next step. 

This option will configure your TV’s settings for store 

environment and depending on the TV model being 

used, the supported features of it may be displayed on 

the side of the screen as an info banner. This option 

is intended only for store use. It is recommended to 

select 

Home Mode

 for home use. This option will be 

available in 

Settings>System>More

 menu and can 

be turned off/on later. Make your selection and press 

OK

 to continue. 

Depending on the model of your TV and the country 

selection 

Privacy

 menu may appear at this point. Using 

this menu you can set your privacy privileges. Highlight 

a feature and use Left and Right directional buttons 

to enable or disable. Read the related explanations 

displayed on the screen for each highlighted feature 

before making any changes. You can use 

Programme 

+/-

 buttons to scroll up and down to read the entire 

text. You will be able to change your preferences at 

any time later from the 

Settings>System>Privacy

menu. If the 

Internet Connection

 option is disabled 

Network/Internet Settings

 screen will be skipped 

and not displayed. If you have any questions, 

complaints or comments regarding this privacy 

policy or its enforcement, please contact by email at 

smarttvsecurity@vosshub.com.

Highlight 

Next 

and press 

OK

 button on the remote 

control to continue and the 

Network/Internet Settings

menu will be displayed. Please refer to 

Connectivity

section to configure a wired or a wireless connection.  

If you want your TV to consume less power in standby 

mode, you can disable the 

Wake On

 option by setting it 

as 

Off

. After the settings are completed highlight 

Next

and press 

OK

 button to continue.

On the next screen you need to agree to the terms 

and conditions of Freeview Play to make use of the 

related services. Scroll the page to read the entire text 

using the up/down directional buttons or 

Programme 

+/-

 buttons. Highlight 

Yes

 and press 

OK

 on the remote 

to confirm and proceed. Highlight 

No

 and press 

OK

 to 

proceed without confirmation. For further  requirements 

for Freeview Play services refer to the 

Freeview Play 

Platform

 section.

On next screen you can set broadcast types to be 

searched, set your encrypted channel searching  

and time zone (depending on the country selection)

preferences. Additionally you can set a broadcast 

type as your favourite one. Priority will be given to the 

selected broadcast type during the search process 

and the channels of it will be listed on the top of the 

channel list. When finished, highlight 

Next

 and press 

OK

 to continue.

About Selecting Broadcast Type

To turn a search option for a broadcast type highlight 

it and press 

OK

. The checkbox next to the selected 

option will be checked. To turn the search option off 

clear the checkbox by pressing 

OK

 after moving the 

focus on the desired broadcast type option.

Digital Aerial:

 If 

D. Aerial

 broadcast search option 

is turned on, the TV will search for digital terrestrial 

broadcasts after other initial settings are completed.

Digital Cable:

 If 

D. Cable

 broadcast search option 

is turned on, the TV will search for digital cable 

broadcasts after other initial settings are completed. 

A message will be displayed before starting to search 

asking if you want to perform cable network search. If 

you select 

Yes

 and press 

OK

 you can select 

Network

or set values such as 

Frequency

, 

Network ID

 and 

Search Step 

on the next screen. If you select 

No

and press 

OK

 you can set 

Start

Frequency

, 

Stop

Frequency 

and 

Search Step 

on the next screen.