Panasonic TX-43HX600B, Operating Instructions Manual

English

   - 16 -

When finished, highlight 

Next

 and press 

OK

 button 

to continue.

Note:

 Searching duration will change depending on the 

selected 

Search Step

.

Satellite:

 If 

Satellite

 broadcast search option is turned 

on, the TV will search for digital satellite broadcasts 

after other initial settings are completed. Before 

satellite search is performed some settings should be 

made. 

Antenna Type

 menu will be displayed first. You 

can select 

Antenna Type

 as 

Direct

, 

Single Satellite 

Cable

 or 

DiSEqC switch

 by using Left or Right 

buttons. After selecting your antenna type press 

OK

 to 

see the options to proceed. 

Continue

, 

Transponder 

list

 and 

Configure LNB

 options will be available. You 

can change the transponder and LNB settings using 

the related menu options.

•  Direct: 

If you have a single receiver and a direct 

satellite dish, select this antenna type. Press 

OK

 to 

continue. Select an available satellite on the next 

screen and press 

OK

 to scan for services. 

•  Single Satellite Cable:

 If you have multiple 

receivers and a single satellite cable system, select 

this antenna type. Press 

OK

 to continue. Configure 

settings by following instructions on the next screen. 

Press 

OK

 to scan for services.

•  DiSEqC switch:

 If you have multiple satellite dishes 

and a 

DiSEqC switch

, select this antenna type. Then 

set the DiSEqC version and press 

OK

 to continue. 

You can set up to four satellites (if available) for 

version v1.0 and sixteen satellites for version v1.1 

on the next screen. Press 

OK

 button to scan the first 

satellite in the list.

Analogue: 

If 

Analogue

 broadcast search option is 

turned on, the TV will search for analogue broadcasts 

after other initial settings are completed.
After the initial settings are completed TV will start 

to search for available broadcasts of the selected 

broadcast types.
While the search continues current scan results will 

be displayed at the bottom of the screen. After all the 

available stations are stored, 

Channels 

menu will be 

displayed. You can edit the channel list according to 

your preferences using the 

Edit

 tab options or press 

the 

Home

 button to quit and watch TV.

While the search continues a message may appear, 

asking whether you want to sort channels according 

to the LCN

(*)

. Select 

Yes

 and press 

OK 

to confirm

.

(*) 

LCN is the Logical Channel Number system that organizes 

available broadcasts in accordance with a recognizable 

channel number sequence (if available).

Note:

 Do not turn off the TV while initializing first time 

installation. Note that, some options may not be available 

depending on the country selection.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (HDD with external power 

supply) external hard disk drives or USB memory stick to your 

TV by using the USB inputs of the TV.

IMPORTANT!

 Back up the files on your storage devices 

before connecting them to the TV. Manufacturer will 

not be responsible for any file damage or data loss. 

Certain types of USB devices (e.g. MP3 Players) 

or USB hard disk drives/memory sticks may not be 

compatible with this TV. The TV supports FAT32 and 

NTFS disk formatting.
Wait a little while before each plugging and unplugging 

as the player may still be reading files. Failure to do 

so may cause physical damage to the USB player 

and the USB device itself. Do not pull out your drive 

while playing a file.
You can use USB hubs with your TV’s USB inputs. 

External power supplied USB hubs are recommended 

in such a case. 
It is recommended to use the TV’s USB input(s) 

directly, if you are going to connect a USB hard disk.

Note:

 When viewing media files the 

Media Browser

 menu 

can only display a maximum of 1000 media files per folder.

Media Browser

You can play back music and movie files and display 

photo files stored on a USB storage device by 

connecting it to your TV. Connect a USB storage device 

to one of the USB inputs located on the side of the TV. 
After connecting a USB storage device to your TV 

Media Browser

 menu will be displayed on the screen. 

You can access the content of the connected USB 

device any time later from the 

Sources

 menu. Select 

the related USB input option from this menu and press 

OK

. You can also press the 

Source

 button on the 

remote and then select your USB storage device from 

the list of sources. Then select the file of your choice 

and press 

OK

 to display or play it back. 

You can set your 

Media

Browser

 preferences by 

using the 

Settings

 menu. 

Settings

 menu can be 

accessed via the information bar which is displayed 

on the bottom of the screen while playing back a video 

or an audio file or displaying a picture file. Press the 

Info

 button if the information bar has disappeared, 

highlight the gear wheel symbol positioned on the 

right side of the information bar and press 

OK

. 

Picture 

Settings

, 

Sound Settings

, 

Media Browser Settings

and 

Options

 menus will be available. The contents 

of these menus may change according to the type of 

the currently open media file. Only 

Sound Settings 

menu will be available while playing back audio files.