Panasonic TX-43HX600B, Operating Instructions Manual

English

   - 20 -

Balance

Sets sound balance. This feature will be activated if 

Sound Output

 option is set as 

TV

or 

Headphone Only

. Balance item adjusts the balance level of the TV speakers and 

headphone together.

Reset

Resets some of the sound settings to factory defaults.

Network Menu Content

Network Type

Disable the network connection or change the connection type.

Scan Wireless 

Networks

Start a search for wireless networks. This option will be available if the 

Network Type

is set as 

Wireless Device

.

Disconnect

To delete your saved wireless network profile, highlight this option and press 

OK

. This 

option will not be available if you did not save your wireless network profile. Refer to 

Connectivity

 section for more information.

Press WPS on your 

wifi router

If your modem/router device has WPS, you can directly connect to it using this option. 

Highlight this option and press 

OK

. Go to your modem/router device and press the 

WPS button on it to make the connection. This option will be available if the 

Network 

Type

 is set as 

Wireless Device

.

Internet Speed Test

Start a speed test to check your connection bandwidth. The result will be displayed on 

the screen when finished.

Advanced Settings

Change the IP and DNS configurations of your TV. 

Wake On

Enable or disable this feature by setting it as 

On

 or 

Off

.

Note:

 For detailed information on the options of this menu refer to the 

Connectivity

 section.

Installation Menu Content

Automatic channel 

scan (Retune)

Displays automatic tuning options. 

D. Aerial:

 Searches and stores aerial DVB stations. 

D. Cable:

 Searches and stores cable DVB stations. 

Analogue:

 Searches and stores 

analogue stations. 

Satellite:

 Searches and stores satellite stations.

Manual channel scan

This feature can be used for direct broadcast entry.

Network channel 

scan

Searches for the linked channels in the broadcast system. 

D. Aerial:

 Searches for aerial 

network channels. 

D. Cable: 

Searches for cable network channels. 

Satellite: 

Searches 

for satellite network channels. 

Analogue fine tune

You can use this setting for fine tuning analogue channels. This feature is not available 

if no analogue channels are stored and if currently watched channel is not an analogue 

channel.

Satellite Settings

Displays satellite settings. 

Satellite list:

 Displays available satellites. You can 

Add

, 

Delete

 satellites or 

Edit

 satellite settings on the list. 

Antenna installation:

 You can 

change satellite antenna settings and/or start a satellite scan.

Installation Settings 

(optional)

Displays installation settings menu. 

Standby Search (*): 

Your TV will search for new or 

missing channels while in standby. Any new found broadcasts will be shown. 

Dynamic 

Channel Update(*):

 If this option is set as Enabled, the changes on the broadcasts 

such as frequency, channel name, subtitle language etc., will be applied automatically 

while watching.

(*) Availability depends on model.

Clear Service List

Use this setting to clear channels stored. This setting is visible only when the 

Country

option is set to Denmark, Sweden, Norway or Finland.

Select Active 

Network

This setting allows you to select only the broadcasts within the selected network to be 

listed in the channel list. This feature is available only for the country option of Norway.

Signal Information

You can use this menu item to monitor signal related information such as signal level/

quality, network name etc for available frequencies.

First time installation

Deletes all stored channels and settings, resets TV to factory settings.