Panasonic TX-43HX600B, Operating Instructions Manual

English

   - 4 -

Assembling / Removing the pedestal

Preparations

Take out the pedestal(s) and the TV from the packing 

case and put the TV onto a work table with the screen 

panel down on the clean and soft cloth (blanket, etc.)
•  Use a flat and firm table bigger than the TV.
•  Do not hold the screen panel part.
•  Make sure not to scratch or break the TV.

CAUTION:

 Please refrain from inserting pictured screws to the 

TV body when not using the TV stand e.g. wall hanging. Inserting 

screws without pedestal may cause a damage of the TV.

Assembling the pedestal

1. 

The stand of the TV consists of 4 pieces. Install 

these pieces together.

x2

M4 x 12mm

x4

M6 x 20 mm

M6 x 20 mm

2. 

Place the stand(s) on the stand mounting 

pattern(s) on the rear side of the TV. 

3. 

Insert the screws 

(M4

x 12)

 provided and tighten 

them gently until the stand is properly fitted.

M6 x 20 mm

43”

50/55/65”

x6

M4 x 12 mm

x4

M4 x 12 mm

Maintenance

First,  remove  the  mains  plug  from  the  mains 

socket.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet, 

or pedestal by using a soft cloth to remove dirt or 

fingerprints.

For stubborn dirt:
1. 

First clean the dust from the surface.

2. 

Dampen a soft cloth with clean water or diluted 

neutral detergent (1 part detergent to 100 parts 

water).

3. 

Wring out the cloth firmly. (Please note, do not 

let liquid enter the TV inside as it may lead to 

product failure.)

4. 

Carefully wipe moisten and wipe away the 

stubborn dirt.

5. 

Finally, wipe away all the moisture.

Caution

Do not use a hard cloth or rub the surface too hard, 

otherwise this may cause scratches on the surface.
•  Take care not to subject the surfaces to insect 

repellent, solvent, thinner or other volatile substances. 

This may degrade surface quality or cause peeling 

of the paint.

•  The surface of the display panel is specially treated 

and may be easily damaged. Take care not to tap 

or scratch the surface with your fingernail or other 

hard objects.

•  Do not allow the cabinet and pedestal to make 

contact with a rubber or PVC substance for a long 

time. This may degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular 

intervals.
Moisture and dust may cause fire or electrical shock.