Panasonic TX-43LX650B, Operating Instructions Manual

English

   - 17 -

second channel. When the second channel is selected, 

you can press the 

Blue

 button and the first selected 

channel will be moved to the position of that channel. 

You can press the 

Yellow

 button and enter the number 

of the channel you want to select. Then highlight 

OK

and press 

OK

 to go to that channel.  You may need to 

set the 

LCN

 option to 

Off

 in order to enable this feature.

Channel Edit:

 Edit channels in the channel list. Edit 

the name of the selected channel and display 

Network 

Name

, 

Channel Type

 and 

Frequency 

information 

related to that channel if available. Depending on the 

channel other options may also be editable. Press 

OK

or the 

Yellow

 button to edit the highlighted channel. 

You can press the 

Blue

 button to delete the highlighted 

channel.

Channel Delete:

 Highlight the desired channel/s on 

the list and press 

OK

 or the 

Yellow

 button to select/

unselect. Then press the 

Blue

 button to delete the 

selected channel/s.

Clear Channel List:

 Delete all channels stored in the 

channel list. A dialogue will be displayed for confirma

-

tion. Highlight 

OK

 and press 

OK

 button to proceed. 

Highlight 

Cancel

 and press 

OK

 to cancel.

Input Source - Cable

Channel Scan:

 Start a scan for digital cable channels. 

If available, operator options will be listed. Select the 

desired one and press 

OK

. 

Scan Mode

, 

Frequency

and 

Network ID

 options may be available. The options 

may vary depending on the operator and the 

Scan 

Mode 

selections. Set the 

Scan Mode

 as 

Full

 if you 

don’t know how to set up other options. Highlight 

Scan

and press 

OK

 or the 

Right

 directional button to start 

the scan. You can press the 

Back/Return

 button to 

cancel the scan. The channels that have already been 

found will be stored in the channel list.

Single RF Scan: 

Enter the 

Frequency 

value.

 Signal 

Level

 and 

Signal Quality

 of the selected 

Frequency

will be shown. Highlight

the 

Scan

 option and press 

OK

or the 

Right

 directional button to start scan. The found 

channels will be stored in the channel list.

LCN:

 Set your preference for LCN. LCN is the Logical 

Channel Number system that organises available 

broadcasts in accordance with a recognisable channel 

number sequence (if available).

Channel Scan Type:

 Set your scan type preference. 

Channel Store Type: 

Set your store type preference. 

Favourite Network Select:

 Select your favourite net-

work. This menu option will be active, if more than one 

network is available. This option may not be available 

depending on the selected country during the initial 

setup process.

Channel Skip:

 Set channels to be skipped when 

switching the channels via 

Pro/-

 buttons 

on the remote. Highlight the desired channel/s on the 

list and press 

OK

 to select/unselect.

Channel Swap:

 Replace the positions of the two 

selected channels in the channel list. Highlight the 

desired channels on the list and press 

OK

 to select. 

When the second channel is selected, the position of 

this channel will be replaced with the position of the 

first selected channel. You can press the 

Yellow

 button 

and enter the number of the channel you want to select. 

Then highlight 

OK

 and press 

OK

 to go to that channel. 

You may need to set the 

LCN

 option to 

Off

 in order to 

enable this feature.

Channel Move:

 Move a channel to the position of 

another channel. Highlight the channel you want to 

move and press 

OK

 to select. Then do the same for a 

second channel. When the second channel is selected, 

you can press the 

Blue

 button and the first selected 

channel will be moved to the position of that channel. 

You can press the 

Yellow

 button and enter the number 

of the channel you want to select. Then highlight 

OK

and press 

OK

 to go to that channel.  You may need to 

set the 

LCN

 option to 

Off

 in order to enable this feature.

Channel Edit:

 Edit channels in the channel list. Edit 

the name of the selected channel and display 

Network 

Name

, 

Channel Type

, 

Frequency

,

 Modulation 

and 

Symbol Rate 

information related to that channel. 

Depending on the channel other options may also be 

editable. Press 

OK

 or the 

Yellow

 button to edit the 

highlighted channel. You can press the 

Blue

 button 

to delete the highlighted channel.

Channel Delete:

 Highlight the desired channel/s on 

the list and press 

OK

 or the 

Yellow

 button to select/

unselect. Then press the 

Blue

 button to delete the 

selected channel/s.

Clear Channel List:

 Delete all channels stored in the 

channel list. A dialogue will be displayed for confirma

-

tion. Highlight 

OK

 and press 

OK

 button to proceed. 

Highlight 

Cancel

 and press 

OK

 to cancel.

Input Source - Satellite

Satellite Re-scan: 

Start a satellite scan beginning 

with the antenna selection screen. When this scanning 

option is preferred, some scanning configurations will 

not be available and thus the preferences you made 

during the initial setup process may not be changed.
For the 

General Satellite 

channel installation mode 

SatcoDX Scan

 option may also be available here. 

Copy the relevant sdx file into the root directory of an 

USB storage device and connect it to your TV. Highlight 

this option and press 

OK

. 

Download SatcoDX

 option 

will be highlighted, press 

OK

 to continue. Select the sdx 

file from the connected USB storage device on the next 

screen and press 

OK

. Satellite selection screen will 

be displayed. The status of the first satellite option will 

appear as 

On

. Highlight that satellite option and press 

OK

. Set the parameters corresponding to your system