English
- 25 -
Connectivity
Wired Connectivity
To Connect to a Wired Network
•
You must have a modem/router connected to an
active broadband connection.
•
Ensure that Nero Media Home software is installed
to your PC (for media sharing function). See “
Nero
Media Home Installation
” section.
•
Connect your PC to your modem/router. This can
be a wired or wireless connection.
•
Connect your TV to your modem/router via an
ethernet cable. There is a LAN port at the rear
(back) of your TV.
Broadband ISP connection
LAN (ethernet) cable
LAN input on the rear
side of the TV
• To access and play shared files, you must select the
Media Player
. Press the
Menu
button and select
Media Player
. Press
OK
to continue. Select the
desired file type and press
OK
. You must always
use the
Media Player
screen to access and play
shared network files.
•
PC/HDD/Media Player or any other devices that are
compatible should be used with a wired connection
for higher playback quality.
To configure wired settings please refer to the
Network Settings section in the
Setup menu.
•
You might be able to connect your TV to your LAN
depending on your network’s configuration. In such
a case, use an ethernet cable to connect your TV
directly to the network wall outlet.
LAN input on the rear
side of the TV
network
wall socket
Configuring Wired Device Settings
Network Type
The
Network Type
can be selected as
Wired
Device,
Wireless Device
or
Disabled
, in accordance with the
active connection to the TV set. Select this as
Wired
Device
if you are connecting via an ethernet.
Internet Speed Test
Highlight
Internet Speed Test
and press the
OK
but-
ton. TV will check the internet connection bandwidth
and display the result when complete.
Advanced
Highlight
Advanced
and press the
OK
button. On the
next screen you can change the IP and DNS settings
of the TV. Highlight the desired one and press Left or
Right button to change the setting from
Automatic
to
Manual
. Now you can enter the
Manual IP
and /
or
Manual DNS
values. Select the related item in the
drop down menu and enter the new values using the
numeric buttons of the remote. Press the
OK
button
to save settings when complete.
