Panasonic TX-48LZ1500B Manual Download

Page: 351 / 363

Digital TV

Some features are not available on all models.

Before requesting service or assistance, please follow these simple guides to

solve the problem.
If the problem still persists, please contact your local Panasonic dealer for

assistance.

Block noise, frozen or disappearing image occurs / Some channels cannot be

tuned

●

Check the position, direction and connection of the aerial or dish.

●

Check

Signal Condition

. If the level of

Signal Quality

is low, the DVB

signal is weak. Connecting the aerial to the TV directly may improve signal

quality than connecting the aerial through the equipment (Set top box,

DVD, etc.).

Watching > Tuning and editing channels > Signal Condition

Watching > Basic > Basic connection

●

Weather conditions affect signal reception (heavy rain, snow, etc.), in

particular in poor reception areas. Even during good weather, the high

pressure can cause poor reception of some channels.

●

Due to the digital reception technologies involved, quality of the digital

signals may be relatively low in some cases, despite good reception of

analogue channels.

●

Turn the TV off with Mains Power On / Off switch, then turn it on again.

Satellite Auto Setup

cannot be done completely

●

Check connections and dish alignment.

Watching > Basic > Basic connection

●

If the problem persists, consult your local dealer.

Faulty dish

message appears

●

The satellite cable may be short-circuited or there may be connection

problems of the cable. Check the cable and connection and then turn the

TV off with Mains Power On / Off switch, and turn it on again.

●

If the message persists, consult a dish installer for checking the dish and

cable.

- 351 -

Summary of Contents for TX-48LZ1500B












































































































































































































































































































































































Search results

Summary of Contents for TX-48LZ1500B

Reviews:

Related manuals for TX-48LZ1500B

Brands by name

Popular brands

Panasonic TX-48LZ1500B, Manual

Search results

Summary of Contents for TX-48LZ1500B

Reviews:

Related manuals for TX-48LZ1500B

Brands by name

Popular brands