Panasonic TX-55JZ2000E Operating Instructions Manual Download

Page: 17 / 84

English

Connecting Bluetooth

devices

Registering Bluetooth

devices

This TV supports Bluetooth

communications.

Bluetooth

devices that have been registered (paired)

with this TV can connect to (communicate with) this TV.

When registering (pairing) a Bluetooth

device with

this TV, move the device within 50 cm of the TV.

It is not possible to register (pair) Bluetooth

devices

that are not compatible with this TV.

If a Bluetooth

enabled device that you have

registered (paired) with this TV is then registered
and used on another device, it may then be made
unavailable for use with this TV. Register the device
on this TV again if this occurs.

You can register Bluetooth

audio devices that

support A2DP on this TV. Due to the characteristics
of wireless technology, there will be some delay
between the playback of video and audio.

A maximum of 2 audio devices that support A2DP
can be used simultaneously. To use 2 devices, set
[Dual Audio] (Setup > Bluetooth Setup > Bluetooth
Audio Settings) to [On], and then connect the second
device.

For details, refer to [eHELP] (Search by Purpose >
Functions > Bluetooth devices).

Registering the remote control

(supplied)

Either Bluetooth

wireless technology or the

infrared communication function can be used for the
transmissions between the TV and the remote control.
Since voice controls (p. 20) use Bluetooth

wireless

technology, the remote control needs to be registered
(paired) with the TV.

When using the remote control for the first time after
purchase, when you press any button while pointing
the remote control at the remote control signal
receiver with batteries inserted, the remote control is
automatically registered (paired).

When registering, face the remote control at the
remote control signal receiver on the TV, within about
50 cm.

Registration may not be completed correctly if the
batteries in the remote control are running low.

Remote control signal receiver

If registration fails

If registration (pairing) is not completed properly, try
registering again.

Display the menu bar and select [Main Menu], and
then select [Setup]

Main Menu

Setup

select

access

Select the remote control setting menu in [System
Menu]

select

access

Select [Pairing]

select

access

The registration screen is displayed, so follow the
on-screen instructions to register.

For details, refer to [eHELP] (Search by Purpose >
Functions > Voice Control > Settings).

Note

If the remote control is not registered (paired) with the
TV, they communicate via infrared. Face the remote
control at the TV’s remote control signal receiver
for operation when infrared communication is used.
Please note that voice controls will not be available.

If the remote control is registered (paired) with the TV,
they communicate via Bluetooth

. You will not need

to face the remote control at the TV’s remote control
signal receiver when Bluetooth

communication is

used. Please note, however, that you will need to
face the remote control at the remote control signal
receiver for operation when turning on or off the TV.