18
How to Use Menu Functions
Menu
Item
Adjustments / Configurations (alternatives)
Timer
Off Timer
Sets the time until the TV automatically goes to Standby mode.
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
Time Zone
Adjusts the time data.
●
The time data will be corrected based on GMT.
●
Set to
[Auto]
to adjust the time automatically according to your area.
Auto Standby
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for 4 hours.
[Off] / [On]
●
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
●
The notification message will appear 3 minutes before going into Standby
mode.
No signal Power off
Enables turning the TV off if no signal is detected for 10 minutes.
[Off] / [On]
Setup
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode.
Child Lock
Locks a channel / AV input to prevent access to it.
DVB-T T
uning Menu
Favourites Edit
Creates a list of favourite channels.
Channel List
Skips unwanted channels or edits channel list.
Auto Setup
Automatically sets the channels supplied.
Manual Tuning
Searches for the DVB-T channels manually.
Update Channel List
Updates Channel List while keeping your settings.
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries).
New Channel
Message
Selects whether to give a notification message when a new channel is found.
[Off] / [On]
Service
Replacement
Set to [On] to enable a message to switch to the available service
(only available in some countries).
[Off] / [On]
Signal Condition
Checks the DVB-T signal condition.
Add TV Signal
Adds the TV mode.
●
This function is available if you skip any modes to tune in Auto Setup for
first using the TV.
●
To operate, refer to
“Auto Setup”
operations for first using the TV.
(p. 11)
