On screen messages
Frequently Asked
Questions
F
AQs, etc.
69
Message
Meaning / Action
All tuning data will be erased
“Shipping Condition” will erase all tuning data (p. 41).
Are you sure ?
Confirm correct operation.
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
Confirm correct operation.
Bad signal
The signal is weak. Check the aerial is plugged in properly. It may be
necessary to have an aerial installer check the signal and aerial alignment.
Reset channels. (p. 34 and p. 35)
Child Lock is active !
Press OK to enter PIN.
The selected channel is locked in Child Lock (p. 40). You must enter the
PIN number before the channel will be displayed.
Feature not available
It is not possible to record from COMPONENT, HDMI or PC. Connect the recorder
to the TV using a fully wired SCART cable for recording from the TV tuner.
Confirm Q-Link and VIERA Link settings (p. 52 - p. 55)
On screen messages
Found new software version ***.
Press OK to start update
(may take 40 mins)
or Press EXIT to ignore.
and you can update when TV is in standby.
There is a new software available.
Invalid operation - Please check settings
and connections.
Check the Q-Link or VIERA Link connection and setting (p. 52 - 55).
Invalid system time. Please exit !
Cannot get the time information. Check the connection of the RF cable.
Max. number of Timers already set !
The maximum number of timer programming events is 15.
New channels found!
Press OK to update Channel List
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the broadcasters.
This message can be deactivated by setting “New Channel Message” to Off in
“DVB Tuning Menu”. Selecting OK will be performed “Update Channel List”.
No channel found.
Please check aerial or local channel
availability. Press OK to start Auto Setup.
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
No module inserted
Check the CI module inserted completely (p. 43).
No recording - Check media
The tape or disc may be “write protected”, missing or damaged.
No recording - Already recording
The equipment may already be recording.
No recording - Unknown reason
The recording may not be performed. Check the equipment.
Disc or tape may be full.
No service
The broadcaster has stopped the service. Check the channel in the TV
Guide. (p. 18 and p. 19)
No signal
The TV cannot detect the signal. Check the connection of the RF cable.
PIN incorrect!
The PIN number you entered is wrong.
Please check settings and connections
on HDMI devices.
Communication error in VIERA Link function (p. 55).
Please wait.
A function is in progress.
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn
the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping Condition
Completed. Please switch off TV.
“Auto Setup” will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
Sending Preset Data
Please wait!
Q-Link or VIERA Link channel download is in progress.
Software successfully updated.
Press EXIT to continue.
The software updating is finished.
Software update failed. Please try again later.
Press EXIT to continue.
Perform “System Update Search Now” in System Update (p. 42).
If this is still unsuccessful, there may not be any new software available.