English
5
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure.
(p. 6)
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screw (4)
M5 × 15
Assembly screw (4)
M4 × 10
Assembly screw (2)
M4 × 10
(supplied with Cover )
Bracket
TBL5ZA30091
Cover
TBL5ZB30092
Base
TBL5ZX0219
(TX-L42DT50Y)
TBL5ZX0249
(TX-L47DT50Y)
TBL5ZX0248
(TX-L55DT50Y)
Preparations
Take out the pedestal and the TV from the packing case and put the TV onto a
work table with the screen panel down on the clean and soft cloth (blanket, etc.)
Use a firm table bigger than the TV.
Do not hold the screen panel part.
Make sure not to scratch or break the TV.
Assembling the pedestal
D
F
A
Tabs (top)
Front
Attach the bracket
to the tabs of the top of the base
and fix with
assembly screws
Forcing the assembly screws the wrong way will strip the threads.
Hold the bracket not to fall over.
Securing the TV
1
Attach the pedestal
tabs
Align the 3 tabs on the bracket with the
grooves on the back of the TV and insert
them.
Make sure the centre tab is in the hole
of the TV. Slide in the bracket aligning
bracket.
B
Tighten the 4 assembly screws
loosely
at first, then tighten them firmly to fix
securely.
