background image

On screen messages

 

Frequently Asked 

Questions

 

F

AQs, etc.

67

Other

The TV does not switch On

Press and hold the standby On / Off switch on the remote control 

 

for about 1 second if Power LED is red.
Check the mains lead is plugged into the socket outlet.

 

The fuse in the mains plug may have blown. Replace it with one of 

 

an identical rating (p. 4). 

The TV goes into “Standby mode”

Off Timer function is activated.

 

The TV enters “Standby mode” about 30 mins. after analogue 

 

broadcasting ends.

The remote control does not 
work or is intermittent

Are the batteries installed correctly? (p. 6)

 

Has the TV been switched On?

 

The batteries may be running low. Replace them.

 

Point the remote control directly at the front of the TV (within a 30 

 

degree angle of the front of the TV).
Situate the TV away from sunshine or other sources of bright light 

 

not to shine on the TV’s remote control signal receiver.

There may be red spots, blue 
spots, green spots and black 
spots on the screen

This is a characteristic of liquid crystal panels and is not a problem. 

 

The liquid crystal panel is built with very high precision technology 
giving you fine picture details. 
Occasionally, a few non-active pixels may appear on the screen as 
a fixed point of red, green, blue or black.
Please note this does not affect the performance of your LCD.

The LCD panel moves slightly 
when it is pushed with a finger
Clattered sound might be heard

There is some flexibility around the panel to prevent damage 

 

to the panel.
The panel might move slightly when it is pushed with a finger, and 

 

clattered sound might be heard. This is not a malfunction.

An error message appears

Follow the message’s instructions.

 

If the problem persists, contact the authorized Service Centre.

 

Message

Meaning / Action

All tuning data will be erased

“Shipping Condition” will erase all tuning data (p. 41).

 

Are you sure ? 

Confirm correct operation.

 

Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return

Confirm correct operation.

 

Bad signal

The signal is weak. Check the aerial is plugged in properly. It may 

 

be necessary to have an aerial installer check the signal and aerial 
alignment.
Reset channels. (p. 34 and p. 35)

 

Child Lock is active !
Press OK to enter PIN.

The selected channel is locked in Child Lock (p. 40). You must enter the 

 

PIN number before the channel will be displayed.

Feature not available

It is not possible to record from COMPONENT, HDMI or PC. Connect the 

 

recorder to the TV using a fully wired SCART cable for recording from the 
TV tuner.
Confirm Q-Link and VIERA Link settings (p. 50 - p. 53)

 

On screen messages

Problem

Actions

Summary of Contents for TX-L42S10B









































































Reviews: