- 126 -
●
For DVB mode
Signal Condition
Checks the signal condition.
Watching Tuning and editing channels Signal Condition
●
Not valid in Analogue mode
Attenuator
(
On
/
Off
)
Automatically reduces the DVB-C signal to avoid the interference.
●
If the DVB-C signal is too strong, the interference may occur. In this case,
set to
On
to weaken the signal automatically.
Add TV Signal
Adds the TV mode.
●
This function is available if you skip any modes to tune in
Auto Setup
for
first using the TV.
= Note =
●
The settings in
Tuning Menu
are applicable only for the selected TV mode.
The menu name varies depending on the TV mode. (
DVB-C Tuning Menu
/
DVB-T Tuning Menu
/
Analogue Tuning Menu
)
Language
OSD Language
Changes language for on-screen displays.
Preferred Audio 1 / 2
Selects the first and second preferred language for DVB multi audio
(depending on the broadcaster).
Preferred Subtitles 1 / 2
Selects the first and second preferred language for DVB subtitles (depending
on the broadcaster).
●
To display subtitles
