- 43 -
●
If a VCR is connected only with the RF cable in Analogue mode, edit
VCR
.
Auto Setup
Automatically retunes the channels received in the area.
●
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are
erased.
●
If Child Lock PIN number has been set, the PIN number is required.
Functions Child Lock PIN number
●
If tuning has not been done completely, set
Manual Tuning
.
Watching Tuning and editing channels Manual Tuning
■
DVB-C, DVB-T, Analogue channels
1. Select
Auto Setup
with / and press
OK
to access
2. Set
DVB-C Auto Setup Settings
with / / / and press
OK
to store
(DVB-C)
●
Scan Mode
Full
:
Scans the whole frequency range.
Quick
:
Scans the suitable frequency in your country.
●
Normally set
Frequency
,
Symbol Rate
and
Network ID
to
Auto
. If
Auto
is not displayed or if necessary, enter each value specified by your
cable provider with numeric buttons.
●
After settings, select
Start scan
with / and press
OK
to search.
3. The confirmation screen is displayed and press
OK
to start
Auto Setup
(Settings are made automatically)
●
When the operation is completed, the channel at the lowest position will
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu
2. Set
Auto Setup
with following control panel buttons
●
Move the cursor / select from a range of options / select the menu item
