- 45 -
●
Use
Fine Tuning
to make small adjustments to the tuning of an individual
programme (affected by weather conditions, etc.).
●
If a VCR is connected only with the RF cable, select channel position
0
.
Update Channel List
By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
●
The channel list is updated while keeping your settings in
Favourites Edit
,
Channel List
,
Child Lock
, etc.
●
Depending on the signal condition, the update may not work properly.
New Channel Message
Selects whether to give a notification message when a new DVB channel is
found or not.
●
When a notification message appears, you can perform
Update Channel
List
pressing
OK
.
Signal Condition
Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for DVB
reception.
●
Use the Signal Quality indicator as follows.
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the terrestrial aerial or cable)
●
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
For DVB mode
