How to Use Menu Functions
39
Menu
Item
Adjustments / Configurations (alternatives)
Picture
Eco Mode
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting conditions
[Off] / [On]
P-NR
Picture Noise Reduction
Reduces unwanted picture noise and flicker noise in the contoured parts of a
picture
[Off] / [Min] / [Mid] / [Max] / [Auto]
●
Not valid when [Viewing Mode] is set to [Game] or [1080p Pure Direct] is set to
[On]
3D-COMB
Makes still or slow moving pictures more vivid
[Off] / [On]
●
Occasionally, while viewing still or slow moving pictures, colour patterning may
be seen. Set to [On] to display sharper and more accurate colours.
●
For PAL / NTSC signal reception in TV mode or from composite (except 3D
mode)
3D Settings
Adjusts and sets to view 3D images (p. 35)
Screen Display
Turns the screen off when you select [Off]
[Off] / [On]
●
The sound is active even if the screen turns off.
●
Press any buttons (except Standby) to turn the screen on.
●
This function is effective in reducing power consumption when listening to the
sound without watching the TV screen.
Advanced Settings
1080p Pure Direct
Reproduces the original image quality in detail for 1080p (HDMI) input signal
[Off] / [On]
●
Not valid on 3D mode
Intelligent Frame
Creation
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth
[Off] / [Min] / [Mid] / [Max]
●
Depending on the contents, images may be noisy. To prevent the noise, change
the setting.
●
Not valid when [Viewing Mode] is set to [Game]
24p Smooth Film
Automatically compensates the picture frame rate to make the 24p source movie
images smooth
[Off] / [Min] / [Mid] / [Max]
●
This is available only for 24p signal input and displayed instead of [Intelligent
Frame Creation].
●
Not valid when [Viewing Mode] is set to [Game]
Film Cadence
Detection
Improves vertical resolution for movie images
[Off] / [On]
●
This function is available for the interlaced signal (except in VIERA Connect or
when [Viewing Mode] is set to [Game]).
3D Refresh Rate
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear
[Auto] / [100Hz] / [120Hz]
[100Hz]:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
[120Hz]:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
Side Panel
Adjusts the brightness of the side panel
[Off] / [Low] / [Mid] / [High]
●
The recommended setting is [High] to prevent panel “image retention”.