Identifying Controls
●
Quick Start
Guide
F
TV
AV
9
Auto power standby function
■
The TV will automatically go to Standby mode in the following conditions:
●
no signal is received and no operation is performed for 30 minutes in Analogue TV mode
•
“Off Timer” is active in the Setup Menu (p. 19)
•
no operation is performed for the period selected in “Auto Standby” (p. 36)
•
This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch
●
Recording.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
■
MENU
Open the main menu
EXIT
Exit the menu system and return to the
normal viewing screen
Move the cursor / select the menu item
Move the cursor / adjust levels / select from
a range of options
Access the menu / store settings after
adjustments have been made or options
have been set
BACK/
RETURN
Return to the previous menu
ON SCREEN HELP Instructions box - Operation guide
■
Example (Owner ID):
EXIT
RETURN
PIN entry
0
9
Please enter new PIN
PIN
Owner ID
*
* * *
Operation guide will help you.
TV
Remote control signal receiver
Do not place any objects between the TV remote control signal receiver
●
and remote control.
USB 2 port
(p.
13, 62, 66
and p.
75)
Function select
Volume / Contrast / Brightness / Colour / Sharpness /
●
Tint (NTSC signal) / Bass (“Music” or “Speech” mode
in the Sound Menu) / Treble (“Music” or “Speech”
mode in the Sound Menu) / Balance / Auto Setup
(p. 40 and p. 41)
For changing TV channel up or down. When a
function is selected by the ‘F’ button, press to
increase or decrease the setting of the selected
function. When in Standby mode, press either
button for about 1 second to switch the TV On.
Changes the input mode
Mains power On / Off switch
Use to switch mains power On/Off.
●
If TV was switched off whilst in Standby mode,
using the Mains Power on/off switch, then it will be
in Standby mode when switched back on using the
same switch.
CI slot
(p.
57)
SD Card slot
(p.
66)
HDMI4 terminal
(p.
93)
AV3 terminals
(p.
93)
Headphones jack
(p.
93)
Power and Timer LED
Red
●
: Standby
Green
: On
Orange
: Timer Programming On
Orange (flash)
: Recording of Timer Programming, Direct TV Recording
or One Touch Recording is in progress
Red with
orange flash
: Standby with Timer Programming On,
Direct TV Recording or One Touch Recording
The LED blinks when the TV receives a command from the remote control.
●
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality when “C.A.T.S.” in the
●
Picture Menu is set to “On” (p. 32)
