E
NGLISH
11
Replacing battery
When the battery is running low, the indicator lamp
fl
ashes 5
times on turning the 3D Eyewear on. In this case, early battery
replacement is recommended.
Dispose of the old batteries as non-burnable rubbish, or in
line with the waste disposal regulations in your local area.
1. Remove the cover
1) Loosen the screw with a precision Phillips (No.0, plus
).
2) Slide the cover using pen tip or screwdriver (minus
), etc.
3) Remove the cover with your
fi
nger as shown in the
illustration below.
The screw is not removed from the cover.
2. Replace the battery.
If dif
fi
culty, remove it with the tip of the driver.
Use the speci
fi
ed type of battery (coin-shaped lithium
battery CR2025.)
Note the correct polarity (
or
).
3. Replace and fasten the cover
Tighten the screw.
Summary of Contents for TY-ER3D6ME
Page 235: ...4 Г АРАНТИЙНЫЙ ТАЛОН ...
