ENGLISH - 7
Using for the first time
Remove the insulating sheet
Insulating sheet
Attach the specialised band
If the 3D Eyewear slips out of place, use
the specialised band included to hold it in
place.
Attach the band to the
left and right tips of the
frame, and adjust the
length.
Specialised band
Attach the nose pad
If required, use the included nose pad.
Nose pad A adjusts the attachment position
of the 3D Eyewear between 2 vertical levels.
(Slot 2 of the 3 protrusions on the 3D Eyewear
into the holes on nose pad A.)
When using nose pad B, ensure that all
3 protrusions on the 3D Eyewear are inserted
into the 3 holes on nose pad B.
Make sure that the nose pad is inserted all
the way and securely attached.
Accessories
< > indicates the quantity.
3D Eyewear case ·······················<1>
Specialised band ························<1>
When the end of the specialised band is
straightened, form a loop at the end of
the band, and fix the twisted part.
Nose pad A/B ·····························<1>
A
B
Select the nose pad that suit you from A
and B.
It is recommended to wear the 3D
glasses over correction glasses without
the nose pad.
Nose pad A
