E
NGLISH
5
Using Precautions
Lens
Do not apply pressure to the liquid crystal shutter. Also, do
not drop or bend the 3D Eyewear.
Do not scratch the surface of the liquid crystal shutter with
a pointed instrument etc.
Doing so may cause damage to the 3D Eyewear, and
reduce the quality of the 3D image.
Infra-red receiver section
Do not soil the infra-red receiver section or attach stickers
etc. to it.
Doing so may prevent the receiver from receiving signals from the
television, which may prevent the 3D Eyewear from operating normally.
If the 3D Eyewear is affected by other infra-red data
communication equipment, the 3D images may not be
displayed correctly.
Cautions during viewing
Do not use devices that emit strong electromagnetic waves
(such as mobile phones or personal transceivers) near
the 3D Eyewear. Doing so may cause the 3D Eyewear to
malfunction.
The 3D Eyewear cannot operate fully at high or low
temperatures.
Please use within the specified usage temperature range
(
page 14).
If the 3D Eyewear is used in a room in which fluorescent
lights (50 Hz) are used, the light within the room may
appear to be flickering. In this case, either darken or switch
off the fluorescent lights when using the 3D Eyewear.
Wear the 3D Eyewear correctly. 3D images will not be
correctly visible if the 3D Eyewear is worn upside down or
back-to-front.
Other kinds of displays (such as computer screens, digital
clocks, or calculators etc.) may be difficult to see while
wearing the 3D Eyewear. Do not wear the 3D Eyewear
when watching anything other than 3D images.
(continued overleaf)
