30
Specifications
Model Number
Type
Power Source
Voltage
Electric current
Supply system
Touch Panel
Detection system
Panel window (W
×
H)
Detection range (W
×
H)
Effective detection range
Operating modes
Resolution (W
×
H)
Detection pitch
Output system
Number of optic elements (W
×
H)
Optic element pitch (W
×
H)
Minimum stylus size (W
×
H)
Scan speed
Touch pen
USB Interface (USB 1.1)
Temperature
Humidity
Resistance to extraneous light
Panel form
External dimensions (W
×
H
×
T)
Weight
Extruded material
TY-TP42P6-S
TY-TP50P6-S
Optic Touch Panel
DC + 5 V
±
10 %
DC + 5 V Max 400 mA under
from USB Bus Power (DC + 5 V Max 500 mA)
Infrared obstruction detection system
928.5 mm
×
526.5 mm (36.55
″
×
20.73
″)
1,118 mm
×
632 mm (44.02
″
×
24.88
″)
916 mm
×
516 mm (36.06
″
×
20.31
″)
1,100 mm
×
620 mm (43.31
″
×
24.41
″)
Detection range + 1.0 mm (0.04
″)
at the top, bottom, left and right
Detection operation at input point, during initial movement and at end point
∗
1
1,833
×
1,033
∗
1
2,201
×
1,241
∗
1
2.0 mm
×
2.0 mm (0.08
″
×
0.08
″)
Coordinate output
230
×
130 elements
276
×
156 elements
4.0 mm
×
4.0 mm (0.16
″
×
0.16
″)
6.0 mm
×
6.0 mm (0.24
″
×
0.24
″)
Initial touch: 30 ms/frame max.; during movement: 8 ms/frame max.
Infrared system
When operating: 0
°
C (32
°
F) to 50
°
C (122
°
F) (temperature gradient 25
°
C (77
°
F)/hr max.)
∗
2
When not operating: -10
°
C (14
°
F) to 60
°
C (140
°
F) temperature gradient 25
°
C (77
°
F)/hr max.
When operating: 20% to 85% (must be no condensation)
∗
2
When not operating: 10% to 95%
Lateral light: 2,000 lx MIN +20% (angle of incidence: 20
°
)
Frontal light: 10,000 lx MIN +20% (angle of incidence: 90
°
)
Flat panel (Flat type)
1,066 mm
×
634 mm
×
69 mm
1,256 mm
×
748 mm
×
69 mm
(41.97
″
×
24.96
″
×
2.72
″)
(49.45
″
×
29.45
″
×
2.72
″)
(Excluding mounting brackets)
(Excluding mounting brackets)
3.5 kg (7.7 lbs) Excluding mounting brackets
4.2 kg (9.3 lbs) Excluding mounting brackets
Aluminum
Notes:
∗
1 When it is used with exclusive driver software.
∗
2 This applies to the touch panel alone. When the panel is attached to a device such as a PDP, follow the
environmental conditions for the device being used.
Terminal No. and Signal name
1
2
4
3
1
Vcc
-DATA
2
+DATA
3
4
GND
(TYPE B)
USB cable length: 2 m (6.56 ft)