II - 14
Checking and adjusting the date and time
Checking the date and time
a) Select the menu item “
” to display the current date.
Example:
(April 1, 2008, in the example)
b) With the date displayed, press the SET (S007) key to change to the time display.
Example:
(11 : 05 : 25 in the example)
c) With the time displayed, press the SET (S007) key to change to the date display again.
* If the current date and time are not displayed correctly, re-set (adjust) them.
Setting (adjusting) the date and time
a) With either the date or time displayed, press the SET (S007) key for 1 second to change to the setting mode.
Example:
(2012 in the example)
b) Each press of SET (S007) con
fi
rms the setting and changes the indication for the 1st digit, and the setting item
becomes as shown in the table.
The indication for the
fi
rst digit returns to “
” after “
”
Table 2
First digit indication
Item
Example setting/state
indication
Meaning of indication
Year
2012
Month
April
Day
1st
hour
11 hours
Minute and second
6 minutes
c) When each of the items is displayed, pressing the UP (S005) or DOWN (S006) key allows you to change the
value.
When the “
” indication is displayed and the SET (S007) key is pressed to con
fi
rm the value, the second value
always becomes “0.”
d) Press the HOME (S004) key to complete the setting operation.
W̲02̲11-21.indd 14
W̲02̲11-21.indd 14
2012/05/22 11:08:06
2012/05/22 11:08:06
