For Your Safety
10
Power
Installation and Relocation
Operating Safeguards
Battery
When the unit is not used over an extended
period of time, switch it Off and unplug it. If
an unused unit is left connected to a power
source for a long period, degraded insulation
may cause electric shock, current leakage or
fire.
The unit should be used only with the power
cord that is supplied by the manufacturer.
Do not position the unit in a location where it
is unstable.
Do not place the unit in a hot humid or dusty
environment.
Prolonged exposure to these adverse
conditions may cause fire or electric shock.
To prevent fire or shock hazard, do not
expose this unit to rain or any type of
moisture.
When moving the unit, be sure to unplug the
power cord from the AC outlet. If the unit is
moved with the power cord attached, it can
cause damage to the cord which could result
in fire or electric shock.
Do not install the unit except by a qualified
service personnel.
CAUTION
After installing or moving the unit, lock the
casters and set the fall-prevention extension
legs.
Move this unit with two persons. Otherwise,
this unit may fall down and cause injury.
If the unit is fallen down or damaged, turn the
unit off and unplug the power cord.
Otherwise, it may cause fire or electric
shock.
Do not put drinks, other liquids or heavy
items on the tray or screen. Accidental
spillage of liquid into the unit may cause
severe damage. If this occurs, turn the unit
off, unplug the power cord and contact your
dealer for service.
Do not lean against the screen or on the tray,
even if the unit is mounted on the wall.
When the unit is not used over an extended
period of time, take the batteries out of the
unit. Otherwise, the batteries may leak. Do
not use the leaked batteries.
Locking the casters
(Push this side)
Push to lock
UB5838C-PJQXC0259ZA_mst.book 10 ページ ２００９年５月２６日 火曜日 午後２時５９分
