Panasonic UB-5838C Service Manual Download

Page: 33 / 136

U103024

Dark Data Error

1. Dark data level is not proper
as the scanned data.
2. CIS is damaged.

1. Check that the screen surface for shading is not dirty.
2. Check the connection between CN606 (SCANNER Board)
   and CN5 (CONTROL Board).
3. Check the connection between CN4 (CONTROL Board)
   and CN800 (MOTOR DRIVE Board).
4. Check the connection between CN604 (SCANNER Board)
   and CN801 (MOTOR DRIVE Board).
5. Check the connection between CN605 (SCANNER Board)
   and Scanner Assy.
6. Check the connections between CIS and CN600 to CN603
    (SCANNER Board).
7. Check the soldering conditions of the following parts on the
    SCANNER Board.

→

IC600, IC602 to IC610, IC614, and Q601 to Q606

8. Check the soldering conditions of the following parts on the
CONTROL Board.

→

IC6 to IC10

9. Replace faulty parts, Scanner Assy., SCANNER Board,
CONTROL Board, or CIS.

U103025

White Data Error

1. CIS signal is saturated due
to incoming light or sunlight
to the CIS.
2. CIS is damaged.
3. Lens is dirty.

1. Check that the screen surface for shading is not dirty.
2. Wipe off the dirt on the lens surface.
3. Replace faulty parts or Scanner Assy.

U306001
U306002

Un-supported SD
Memory Card

1. SDHC Memory Card is set
to this unit.

Must not use a SDHC Memory Card.

1. Unusable SD Memory Card
  is set to this unit.
2. SD Memory Card is not
  proper format for this
  unit.

Format to comply with SD memory card specifications using
the formatting software that can be downloaded from the
following site.

http://panasonic.jp/support/global/cs/sd/download/

sd_formatter.html

U306010

Unavailable
space in SD
Memory Card

In the SD Memory Card, there
is not enough storage space
available.

1. Make space available with a PC.

U306014

Folder on SD
Memory Card
Read Only

The following folders in the SD
Memory Card are set to “Read
Only”.
(1) For UB-5838C
Folder Name: “UB-5838C”
(2) For UB-5338C
Folder Name: “UB-5338C”

1. Change the folder property to “Read / Write”.

U306035

SD Memory Card
Write-protection

The SD Memory Card has
been set to write-protection.

1. Cancel the write-protection.

U306144

SD Memory Card
Write Error

During scanning, SD Memory
Card Write Error occurred.

1. Check whether the SD memory card is normally written
with a PC.

U306160

Same as "U306014"

U307001
U307002

Un-supported
USB Flash
Memory Device

1. Unusable USB Flash
Memory Device is set to
this unit.

1. Replace the USB Flash Memory Device so that the device
meets the requirements of this unit.

U307010

Unavailable
space in USB
Flash Memory
Device

In the USB Flash Memory
Device, there is not enough
storage space available.

1. Make space available with a PC.

U307014

Folder on USB
Flash Memory
Device Read Only

The following folders in the
USB Flash Memory Device
are set to “Read Only”.
(1) For UB-5838C
Folder Name: “UB-5838C”
(2) For UB-5338C
Folder Name: “UB-5338C”

1. Change the folder property to “Read / Write”.

Error Code

Possible Cause

Check Point

Display

Code Name