24
Usage
Using the Electronic Pen
(Optional Device)
When using the electronic pen for the first time,
establish the Electronic Pen mode by taking the
steps below.
1
Confirm that the elite Panaboard driver/
software/book is installed on your
computer, and connect the UB-T580 /
UB-T580W to your computer.
2
Press and release the menu/mode
selector button while pointing the
penpoint toward the elite Panaboard’s
electronic pen signal receiver (next to
the status LED in the upper-left part of
the main unit).
•
The
icon, which indicates Electronic Pen
mode, is displayed in the notification area of
the computer screen, and you can use the
electronic pen.
After establishing the mode by taking the steps
above, click the icon in the notification area of the
computer screen to switch from Finger/Stylus Pen
mode
to Electronic Pen mode
to use the
electronic pen.
(The icon displayed in the notification area
indicates the current mode.)
When you use the electronic pen away from the
elite Panaboard, press and release the menu/mode
selector button to switch between the Finger/Stylus
Pen mode and the Electronic Pen mode.
Note
•
The operation to enable the electronic pen
must be performed for each computer.
•
When you restart your computer, the mode
reverts to Finger/Stylus Pen mode. To use
the electronic pen, click the Finger/Stylus
Pen mode icon in the notification area or
press and release the menu/mode selector
button on the electronic pen.
•
To display the Drawing Menu, touch the
screen board while holding the menu/mode
selector button on the electronic pen in the
Electronic Pen mode.
•
For detailed information about using the
electronic pen, refer to the help menu. For
details on accessing the help information,
see “Viewing the Help of the Software”
(page 25).
Icon and
Mode
Finger/
Stylus Pen
operations
Electronic pen
operations
Finger/
Stylus Pen
mode
Can use
finger or
stylus pen
operation.
Works just like
when you use your
finger or the stylus
pen.
* The selector dial
functions cannot
be used.
Electronic
Pen mode
Cannot be
used.
Turn the selector
dial to select
electronic pen
functions.
Example of the Drawing Menu