Notice
•
Use the electronic pen by holding it at a right angle to the screen board.
Holding it at an angle can cause its position to be read incorrectly.
•
Do not use multiple pens at the same time. This can result in erroneous operation.
•
Do not push the penpoint while holding the pen close to the elite Panaboard. Doing so can cause
erroneous behavior.
Note
•
The electronic pen switches to power-save mode after about 30 minutes.
•
When waking up the pen from power-save mode by pushing the penpoint, the pen’s reaction may be
slow.
•
When operating the electronic pen, you will hear a buzzing sound due to the pen emitting ultrasonic
waves for location detection. This sound does not have any negative effects for nearby people or
devices. It will not cause electrical shocks.
Inserting (Replacing) Batteries
1. Remove (replace) the battery cover.
•
When replacing the cover, follow the procedure in
reverse.
2. Insert (exchange) the battery and replace the
cover.
•
Make sure to use a AAA alkaline battery, and
ensure that
and
face the correct
directions.
Operating Instructions (For Basic Operations)
17
1
Usage
