When disposing of the battery, cover the
battery contacts with insulation (ex. tape).
Direct contact with other batteries may re-
sult in leaking, fire, or explosion.
Do not solder the battery, as it may result
in the battery leaking, generating heat, or
bursting.
CAUTION
Power
When the unit is not used over an exten-
ded period of time, switch it Off and unplug
it. If an unused unit is left connected to a
power source for a long period, degraded
insulation may cause electric shock, cur-
rent leakage or fire.
The unit should be used only with the pow-
er cord enclosed with the unit.
Installation and Relocation
Do not position the unit in a location where
it is unstable.
Do not place the unit in a hot humid or
dusty environment. Prolonged exposure
to these adverse conditions may cause
fire or electric shock.
To prevent fire or shock hazard, do not ex-
pose this unit to rain or any type of mois-
ture.
When moving the unit, be sure to unplug
the power cord from the AC outlet. If the
unit is moved with the power cord attach-
ed, it can cause damage to the cord which
could result in fire or electric shock.
After installing or moving the unit, lock the
casters and set the fall-prevention exten-
sion legs.
Locking the casters
(Push this side)
Push to lock
Move this unit with two persons. Other-
wise, this unit may fall down and cause
injury.
Operating Safeguards
If the unit is fallen down or damaged, turn
the unit off and unplug the power cord.
Otherwise, it may cause fire or electric
shock.
Do not lean against the screen or on the
cover (lower), even if the unit is mounted
on the wall.
Battery
When the unit is not used over an exten-
ded period of time, take the batteries out
of the unit. Otherwise, the batteries may
leak. Do not use the leaked batteries.
Operating Instructions (For Basic Operations)
9
1
For Your Safety