10
4.2. Installation
4.2.1. Environment
The product must not be operated, installed, stored or transported in the following conditions. Potential
malfunction or damage to the product may occur if these instructions are disregarded.
•
Location that is outside
•
Location that is exposed to water, water vapour, steam, salt water or oil
•
Location that is exposed to dust or powder material
•
Location that is exposed to corrosive gas, organic solvent, chemical solution, or flammable gas (the
product is not flame-proof)
•
Location where the ambient temperature is out of the following range:
In transportation and In storage:
–
20 to 50
°
C (with no water or circulating fluid in piping)
In operation: 5 to 35
°
C
•
Location where the ambient humidity is out of the following range or where condensation occurs:
In transportation and storage: 20 to 80%
In operation: 20 to 80%
•
Location that is exposed to direct sunlight or heat radiation
•
Location that is near heat sources and poor in ventilation
•
Location that is subjected to abrupt changes in temperature
•
Location that is subjected to strong electromagnetic noise (intense electric field, intense magnetic field,
or surges)
•
Location that is subjected to static electricity, or conditions where static electricity can discharge to the
product
•
Location that is subjected to strong high frequencies raditation (microwaves).
•
Location that is subjected to potential lightning srtike
•
Location at altitudes of 1000m or higher (except for product storage and transport)
•
Location where the product is affected by strong vibrations or impacts
•
Condition that applies external force or weight causing the product to be damaged
•
Location without adequate space for maintenance as required.
4.2.2. Installation and maintenance space
Top Veiw
Caption
Caption
