17
8.
Magazine Set
When executing a measurement, firstly set the magazine to the automatic changer.
Release the lock of the door on the right side and open the door. If there is an unnecessary magazine in the
measurement section, remove it by clicking [Unload Tray]. If the shelf position is not
“
1
”
, return the
automatic changer to shelf position 1 by clicking [Changer Rev.]. The window will display the shelf position
in the form of
“
[Shelf number] - [Slot number]
”
.
If the shelf number is
“
1
”
and there is no magazine in the reader,
“
Batch Status
”
will display 01-00.
(If the magazine is not in the measurement section,
“
00
”
will be displayed for the slot position.)
Changer Rev
Reversely advances the shelf by 1 step.
Changer Adv
Advances the shelf by 1 step.
Mag Adv
Advances the magazine by 1 slot.
Mag Rev
Reversely advances the magazine by 1 slot.
Unload Tray
Returns the magazine from the reader to the
automatic changer.
Load Tray
Takes the magazine out of the automatic
changer and send it to the reader.
START
Starts the measurement of a badge.
STOP
Stops the measurement of a badge.
Magazines at the bottom shelf will be set first.
Set TLB No 1. The bottom stage of the shelf is shelf position 1 and the top stage of the shelf is shelf position
10.
TLB No.
１
TL Badge
