background image

22

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private 
households)

This symbol on the products and/or accompanying documents means that used electrical 
and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated 
collection points, where they will be accepted on a free of charge basis. Alternatively, in 
some countries you may be able to return your products to your local retailer upon the 
purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any 

potential negative effects on human health and the environment which could otherwise arise from 
inappropriate waste handling. Please contact your local authority for further details of your nearest 
designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further 
information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct 
method of disposal.

Please connect our service office,and Directions of a service office are followed.

Sevice office List

North America area

Panasonic Industrial Devices Sales Company of America
Panasonic Way Secaucus, New J ersey 07094 USA

Europe area

Panasonic Industrial Devices Sales Europe GmbH
Willoughby Road, Bracknell, Berks., RG12 8FP.THE UNITED KINGDOM

Japan area

Panasonic System Solutions Japan Co., Ltd.
600,Saedo-cho,Tsuzuki-ku,Yokohama-shi,Kanagawa 224-8539,Japan

Panasonic System Solutions Japan Co., Ltd.

600,Saedo-cho,Tsuzuki-ku,Yokohama-shi,Kanagawa 224-8539,Japan

PYQX1099ZA/J1

Jan. 2017

Published in Japan

Summary of Contents for UD-7900N14EU























Reviews: